Project: meliodas.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 210x210mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA Elegoo Black Transmission Distance: 0.6
    PLA Elegoo Purple Transmission Distance: 5
    PLA SmartMaterials Pink Transmission Distance: 6.2
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (1.04mm) swap to Purple
    At layer #17 (1.52mm) swap to Pink
    At layer #19 (1.68mm) swap to White for the rest.
 

Note: for your Perphet alignment with other images in honeycomb mode download the guide

https://www.nexprint.com/en/models/ G0471687?printConfigId = G0369851

Every impulse helps me to continue creating new designs. I appreciate your support so much!

Don't forget to like it and save it so you can find it easily later!