Hole board (160 mm x 160 mm), hardware-free version - 儿创哥

Hole board (160 mm x 160 mm), hardware-free version

儿创哥

Print Profile(1)

0.2 mm layer height, 2‑wall walls, 15% infill density

5-disc

PETG/PLA

Designer

Released 2026-04-19

The upright pegboard seat requires no hardware, but it does need 3D-printed bolts. The download link for the bolts is as follows:

1. The pegboard dimensions are as follows, with a hole pitch of 40 mm (the same as IKEA’s pegboards):

2. Installation diagram:

3. For the bolts, a flat-head screwdriver with a 1.5 mm shank is recommended; alternatively, a smartphone charger can also be used.

4. It is recommended that the pegboard be no taller than three layers; otherwise, without an external frame, it may become somewhat flexible.

5. For the bolts, it is recommended to use PETG printing.

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Credit must be given to the creator

Only noncommercial uses of the work are permitted

Remixes must be shared under the same license

No more