This is a modular desk clock designed to fit standard quartz movements. The design separates the faceplate from the frame to optimize print quality and allow for multicolor icons without an AMS.

⚠️ IMPORTANT

1. Check Fitment First: Quartz clock mechanisms vary in size by manufacturer (Body size & Shaft thickness). Before printing the full clock, please print the "Quartz Clock Mechanism base" plate to check the fit.
* If it doesn't fit, you can edit the included STEP file. *

2. Glue Required: You will need glue for the assembly step.

🚀 Assembly Guide

1. Mechanism Assembly
- First, place your quartz clock mechanism inside the printed Quartz Mount Box
- Glue the box's flat surface to the back of the Faceplate with Numbers.
- Crucial: Make sure the clock shaft sticks out through the hole properly before the glue sets.

2. Insert Faceplates
- Insert the Clock Faceplate (with the mechanism attached) into the frame.
- Insert the other 3 Decorative Faceplates (Gear, Nozzle, Circuit) into the remaining sides of the frame.
 * Note: An Empty Faceplate STL is also included if you want to add your own custom shapes. *

3. Frame Assembly (Alignment)
- The frame parts feature "A" and "B" alignment markers embossed on the inner surfaces.
- Match A to A and B to B when snapping the top and bottom caps together to lock the faceplates in place.

4. Installing the Hands
- Hour Hand: 🚀 Retro Rocket (shorter hand)
- Minute Hand: ☄️ Falling Meteor (longer hand)
* Press them gently onto the clock shaft. *