If you tiny filament specks that won't come off, this is the solution. This generator creates a precision single-layer sheet that fuses to all leftover debris on your build plate, allowing you to peel everything off in one clean move. (It's satisfying)

⚙ Why use this?

• Deep Clean: Pulls up residues from "Silk" or "PETG" filaments that scrapers leave behind.
• Adhesion Check: Instantly see if your bed is leveled and if there are any "dead zones" on your plate.
• Save Your Plate: No more scratching your PEI coating with metal scrapers.
• Fully Parametric: Works for A1 Mini (180mm), X1/P1/P2/A1 (256mm), or any other printer.

🛠 Customizer Features

• Dimensions: Input your exact bed size.
• Thickness: Set it to exactly one layer height (e.g., 0.20mm) for the best results.
• Safety Margin: Built-in margin to ensure you don't print over the edges or hit the build plate screws.

🖨 Print Settings

• Material: Use the same material as the residue you want to remove (usually PLA).
• Layer Height: Match the "Thickness" parameter in the generator.
• Infill: 100% (Solid).
• Bed Temp: Use your standard settings.
• Removal: Let the plate cool down completely! The sheet will "shrink" slightly, making it easier to lift the edge and peel everything off.

❤ Share your clean plates!
Post a photo of your peeled sheet! It’s strangely satisfying to see all the dust and plastic bits it caught. If you give permission, I'll add your photo to the gallery.

Happy Printing!