A balancing game for children and adults alike!

How to play?

Take turns by placing blocks on the base by either rolling the die for it or choosing a preferred block. If the tower collapses on your turn, you lose!

Printing tips:

• Different wall count and infill % have great impact on the game. I used 2 walls and 15% for every piece. You can print the base with 0 infill, 0 top/bottom layers.
• Scale it to your preferred size! 50% works just fine as well! I also recommend scaling the tetris die up to 133% (20mm).
• I recommend printing the solid blocks and the base on a holographic plate. It gives them a great look (Check out the last few pictures)!

How to customize your own:

To use the project files (.FCStd) you will need FreeCAD, a free to use/download CAD software. After opening the project you will see on the left side all the folders with the models and parameters. When you are done just export the models one by one: Select one of the models, then press Ctrl + e or Top menu > File > Export...

The parameters:

• BaseArcOffset: Offsets the (circle's) arc on the base piece.
• BaseTeethCount: The number of teeth (slots) on the base piece.
• EdgeLength: The size of the blocks.
• GridWallWidth: The wall width of the Grid Blocks. (Solid blocks are not affected)
• DiceEmbossDepth: The depth of the emboss on the dice
• PedestalLength: The horizontal length of the pedestal. (The width is always 3 * EdgeLength)
• PedestalSlotDepth: The depth of the slot the base goes into.
• PedestalHeight: The height of the pedestal.

The project is not foolproof, setting negative/incorrect parameter values might mess up the geometry completely!

Happy printing and customizing!