GIF
holder
tray
storage
organizer
measuring
diy
tools
pegboard
tape
worshop
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
22
4
Design Concept
A simple Pegboard tray to hold something like measuring tape or other items.
Purpose
I have a custom DIY made Pegboard for my work desk and the holes on the board have have non-uniform holes over the whole wall. While measuring I found that the closest I can get is some holes are separated 25mm apart from each other if measuring from the middle of the hole. I made a bunch of different holders for tools I have. All of the uploaded holders are made for holes that fit only boards that are at least 5.2mm in hole size and 25mm apart from each holes center.
Printing Suggestions
Best for strength is to print at least with PETG. Supports are required for the main body.
Assembly Instructions
Remove the supports and the pegboard can be mounted in the slots.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
measuring-tape-holder-pegboard.stlDesigner
756.63 KB
2026-03-10
- measuring-tape-pegboard elegoo.3mfDesigner
217.25 KB
2026-03-10
