📝 Product Description — Under-Desk Headphone Hanger (Clamp-Fit, No Tools Needed)

Keep your headphones cleanly stored and always within reach with this fully 3D-printable under-desk headphone hanger, designed to clamp securely to the frame of adjustable-height desks. The two printed parts lock into place by simply being compressed between the desktop and the metal desk frame, eliminating the need for screws, adhesives, or hardware.

The model is printed in two pieces that slide together during installation. Once positioned on the desk frame, the desktop traps the assembly firmly in place through pressure alone. The design can be easily customized by adjusting the gap dimension in your slicer to match different frame-to-top spacing. Works great with gaming headsets, studio headphones, or lightweight accessories.

Engineered to print reliably with minimal setup, the hanger performs well in PLA, PETG, or ABS. Print it in the same orientation shown in the cover photo to ensure the strongest layer alignment on the hook and clamp surfaces. Make sure that you have enough space between the frame and the tabletop to assemble the parts, and then slide it over to its final place that will hold the parts together!

✅ Features

• Tool-free clamp system — held by the desk frame and tabletop
• Two-part printed design with simple slide-fit assembly
• Universal fit: gap can be scaled or adjusted for different desk frames
• Clean, low-profile hanger shape for a wide range of headphones
• No screws or adhesives required
• Reliable strength using standard 0.2 mm settings
• Works with PLA, PETG, ASA, or ABS
•  

🖨️ Printing Recommendations

• Material: PLA, PETG, ASA, or ABS
• Layer Height: 0.2 mm
• Walls: 4 perimeters
• Infill: 15–30%
• Supports: Not required
• Orientation:
  • Print both parts exactly as shown in the cover photo for proper strength
• Notes:
  • Designed for pressure-fit clamping; ensure your desk gap matches the model