light
light switch
lamp switch
usb cable
electronics
electronic accessory
- 0.2mm layer, 2 walls, 5% infill
4-disc
PLA
Designer
38
5
Lamp switch
I made this lamp switch to fit 3mm / 3.5mm/ 4.0mm USB cables the cables are held by pressure if you use the correct housing. There is also a version that will let you screw the cable in place if you prefer that
Make sure the cable is through the switch hole before soldering
Use super glue to close the housing
For the screw version i have been using M3 – 8 mm screws
Switch use 10x15mm Rocker switch
Link for Switches https://www.aliexpress.com/item/1005009967324884.html?spm=a2g0o.order_list.order_list_main.40.3e4a1802cUWahD
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
- USB Cable Swithches m.3mfDesigner
1.37 MB
2025-10-31
