Apple House Lamp Set

This delightful Apple House Lamp Set brings a warm, cozy touch to your fall decor, illuminating your space with its inviting glow and charming details. Perfect for creating a seasonal ambiance, it features an apple-shaped house with a stem and leaf, complemented by a lamp base and playful decor elements like a happy worm, ripe apples, and yellow pears.

Translucent PLA (or PETG) allows for a bright, autumnal glow but the lamp also illuminates well with Basic PLA. Most components print support-free and quickly, while the apple itself utilizes a dedicated support structure that minimizes time and material waste, leaving no marks and ensuring a consistent glow at the top. Printing the window panes on a textured plate enhances them with a "frosted glass" effect, adding to the overall charm.

Design Details

The design comprises the Apple House and complementary decor pieces. The house can be printed without an ACE unit, while the decor benefits from color changes to achieve a vibrant, multi-colored effect.

Apple House

• Apple House (assembled) - 15cm tall with a 12cm diameter.
• Lamp base - 12cm in diameter, the main body is 1.4cm tall and the door frame extends 4cm above the base.
• The apple house is 12cm in diameter and 13.5cm tall to the tip of the leaf when not mounted on the base.

Decor Items

• Worm: 1.8cm tall, 2.7cm long
• Apples: 1.3cm all around
• Pears: 1.3cm wide, 1.7cm tall

Assembly Instructions

1. Remove supports from the exterior of the apple and the custom support structure inside.
2. Clear supports from the door frame.
3. Attach the steps to the lamp base, ensuring the bottom of the steps aligns flush with the base.
4. Secure the doors into the door frame and affix the long windowpane to the back of the door.
5. Once the door section is complete, glue it onto the base, using the apple as an alignment guide.
6. Attach the windowpanes to the window frames.
7. Insert the windows into the cutouts on the apple.
8. Fit the leaf into the stem with gentle force.
9. Mount the stem onto the top of the apple, applying some pressure.
10. Install the light into the base (compatible with an LED lamp as shown or a puck light with the battery plate removed).
11. Place the apple on the base and enhance it with the decor pieces and happy worm for a finishing touch.

Printing Recommendations

• The apple features a custom-made support structure and additional snug supports for windows and doors.
• Use a textured plate for printing windowpanes to achieve a "frosted glass" effect.

Recommended Filaments

• Apple: PLA Basic Red
• Lamp base & Leaf: PLA Basic Green
• Doors, Windows & Apple stem: PLA Basic Brown
• Window Panes: PETG Translucent Brown
• Door Frame & Stairs: PLA Basic Gray
• Worm: PLA Matte Latte Brown
• Mini Pears: PLA Basic Yellow + PLA Basic Brown
• Mini Apples: PLA Basic Red + PLA Basic Brown