This is a retractable, cat‑paw–shaped tickler:

Demo Video: Click here

Model Overview

1. After printing, you’ll notice that the smallest extension tube features two small protrusions. Simply pull the tube out and insert these protrusions into the corresponding holes on the cat paw—then rotate to lock them securely. An installation video will be uploaded shortly.
2. The paw pads and claws are designed with precise fit tolerances; while they should snap into place with minimal effort, we still recommend securing the claw components with adhesive for added stability.
3. I’ve provided two print configurations: “Layered Printing” [suitable for all printers] and “A1 Single‑Piece Printing” [faster and more time‑efficient—but only compatible with the A1 once uploaded]. If you’re using a different printer model and prefer to print everything in a single batch, you can manually switch to single‑piece printing to significantly reduce print time.

Important Notes

• Do not subject the tickler to violent shaking or swinging. Due to the relatively weak interlayer adhesion in 3D prints, forceful jerking could cause the claw’s locking mechanism to break. Under normal use, however, there’s no issue at all.
• When using the tickler, be sure to firmly secure the corresponding extension tube first.

We hope you enjoy it—and that this cat‑paw tickler proves truly useful! It took considerable effort to bring this design to life, so if you encounter any issues or have feedback, please feel free to share your thoughts. We kindly ask that you avoid leaving low‑rating reviews unless absolutely necessary. Thank you!

Commercial License

• A Commercial License is available through my Patreon: Voxo3D
• $5 to become an early‑bird member and gain access to All My Designs (50+):  voxo3d.com
• We release 4+ new models each month, though we often have even more to share!