Nexprint Logo
Beta
3D ModelsEvents1 Million Creator Fund
$
1
8
7
1
0
Upload

  • exhaust

  • kit

  • ventiliation

  • fan

  • centauri

  • carbon

  • elegoo

  • active

  • negative pressure

Elegoo Centauri Carbon Ventilation Exhaust Kit
Print Profile(1)
  • 0.2mm layer, 3 walls, 15% infill

    3-disc

    PLA

    Designer

    5(1)

35

92

1.6k

263

Released 2025-09-18
Details
Files(5)
Makes & Comments (0)

This is an exhaust kit I designed for the Elegoo Centauri Carbon to exhaust any fumes out when printing parts like ASA, ABS, etc. Included is the following

  • Printer to 4" Duct Adapter
  • Printer Auxillary Exhaust Cover
  • 4" Duct to Fan Adapter
  • Fan to Exhaust Kit Adapter

The Auxillary Exhaust Cover uses 6mm x 2mm magnets to attach to the printer, and the Printer to 4" Duct Adapter uses the existing screws on the printer. The fan is located near the Exhaust Window Kit to allow negative pressure so if there are any leaks, it is not venting to the room and is instead sucking air around the room and printer

 

It is designed to work with the following products linked below, but should work with any 120mm fan as long as you have the right hardware for it (M4 hardware. Length is calculated as “thickness of fan” + “8.5mm” + thickness of nut"

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Credit must be given to the creator

Only noncommercial uses of the work are permitted

Models(5)

  • Fan to 4in Exhaust Adapter.3mfDesigner

    229.74 KB

    2025-09-18

  • model file image
    Fan to Exhaust Kit Adapter.3mfDesigner

    220.72 KB

    2025-09-18

  • Centauri Carbon Auxiliary Exhaust Cover.3mfDesigner

    94.29 KB

    2025-09-18

  • Centauri Carbon to 4in Exhaust Adapter.3mfDesigner

    135.42 KB

    2025-09-18

  • model file image
    Print Profile, 0.2mm Layer Height, PLA.3mfDesigner

    765.41 KB

    2025-09-18

  • View all(5)

No more