This is an impressive miniature of a dog cleric or priest-knight. The figure is a charming blend of a classic cartoon dog and a medieval warrior, complete with a shining suit of plate armor, a pointed helmet, and a red cross on his chest.

3D Printing Technical Sheet: The Dog Cleric

• 3D Model: The Holy Hound Cleric
• Designer: Likely a digital sculptor specializing in fantasy models (e.g., from a patreon or miniature marketplace)
• Dimensions: Approximately 40 mm (height) to fit common tabletop gaming scales
• Weight of Object: Less than 10 grams

Printing Parameters and Finishing

• Slicing Software: Chitubox
• Printer: Resin 3D Printer (e.g., Elegoo Saturn 3)
• Resin:
  • Type: Gray Standard Resin (for high detail)
  • Color: Gray
• Resin Printing Configuration:
  • Layer Height: 0.04 mm (for a balance of detail and print time)
  • Exposure Time per Layer: 2.2 seconds
  • Support Strategy: Medium and light supports, automatically generated with manual placement on the mace and shield for stability.
• Estimated Print Time: 3-4 hours
• Post-processing & Painting:
  • Washing: The printed model is washed in Isopropyl Alcohol (IPA) to remove any uncured resin.
  • Curing: The piece is fully cured under UV light to harden the resin.
  • Priming: The entire model is primed with a black primer to provide a solid base for the metallic paint.
  • Painting: The armor and weapons are painted using a metallic paint (e.g., a "Gunmetal Grey" or "Chainmail" shade) followed by a gloss varnish to enhance the shine. The red cross and other details are painted with acrylics.
  • Varnish: A final protective varnish is applied to the entire figure to protect the paint job.