holder
nozzle
keychain
Nozzle Holder Keychain - Up to 8 Nozzles
Print Profile(1)
0.1mm layer, 3 walls, 15% infill
1-disc
PLA
Designer
25
2
Released 2025-08-27
When I started doing other people printers, I quickly realized how often I have to change nozzles, So I made this Nozzle holder (mk8) that can be attached as a keychain, or just fit in a pocket, I recommend only putting 4 nozzles, but you can also put 8 nozzles using both sides
Pause print to add 4 M6 nuts, that's all, then you can resume print, just keep an eye on your printer
Bill of materials
- NameQuantityNotes
- 1M6 nuts4
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Models(2)
NozzleHolder.stlDesigner
166.88 KB
2025-08-26
- NozzleHolder_0.1mm_PLA_MINIIS_37m7s.gcode.3mfDesigner
295.10 KB
2026-02-21
No more
