The figure is a fantasy creature known as a Beholder. Its body is spherical, with a large central eye, a wide, toothed mouth, and multiple eyestalks protruding from its top.

Technical Data Sheet

• Model Name: The Tyrant's Gaze
• Designer: Morwen Studios
• Category: Dungeons & Dragons, Fantasy Miniature
• File Format: .STL (for 3D printing)
• Parts: Single-piece model (pre-supported version available)
• Dimensions (Approximate):
  • Height: 75 mm (from base to top of central eyestalk)
  • Width: 80 mm (eyestalk tip to eyestalk tip)
  • Base Diameter: 50 mm
• Scale: 32mm Heroic Scale

3D Printing Recommendations

• Printer Type: Resin (SLA/DLP/LCD) is highly recommended to capture the fine details of the eyes, teeth, and eyestalks. An FDM printer can be used, but quality may vary.
• Material: Standard Photopolymer Resin is ideal for miniatures. For increased durability, a blend of standard and flexible resin can be used.
• Layer Height: For high detail, a layer height of 0.03mm to 0.05mm is recommended.
• Supports: Medium to heavy supports will be necessary, particularly under the chin, eyestalks, and the base of the model to prevent warping and ensure a clean print.
• Orientation: Print the model at a slight angle (e.g., 30 degrees) to reduce layer lines on key surfaces and allow for easier support removal.
• Post-Processing:
  1. Wash: Clean the printed model in Isopropyl Alcohol (IPA) to remove uncured resin.
  2. Cure: Place the model under a UV light source to fully harden the resin.
  3. Finishing: Carefully remove supports and sand any remaining marks. The model is now ready for priming and painting.