D&D Female Halfling as a Druid - Mars-TonFabrication | Nexprint: Free 3D Model Downloads

GIF

AMS
Hueforge
2 colors
DnD
Elegoo Centauri Carbon
Black and White
NoAMS
marstonfables
marstonfabrication
Female Halfling
Female Druid
Druid
Halfling

D&D Female Halfling as a Druid

Mars-TonFabrication

Print Profile(2)

0.08mm layer, Hueforge Elegoo Centauri Carbon

1-disc

PLA

Designer

0.08mm layer, Hueforge Bambu Lab A1 With or Without AMS

1-disc

PLA

Designer

Released 2025-08-25

Details

Files(5)

Makes & Comments (0)

D&D Female Halfling Druid

By Kimball Marston

Visit our Store for Bookmarks at:

Mars-TonFables.com

This is a Hueforge Filament Painting using only two colors. This makes it easy to print for those who don’t have an automatic filament changer. This can be done by adding a pause to the print at layer 8 or if your slicer has a change filament option you can use that. I have included the STL file for those without a Bambu Lab Printer. Please download that if you want to manually setup the print.

Start with a solid black color filament and then at layer 8 (0.72mm) swap to a white colored filament. Preferably one with a high transmission distance rating.

The Base image is AI generated using my personal image generator. It is then edited and converted into an STL using HueForge. The HueForge Settings and Filament Painting is done manually using the software.

Other Settings:

Nozzle: 0.4mm
Bed Type: Smooth High Temp
(You can use any Bed Type you want just be sure to change it.)
Layer Height: 0.08mm
First Layer: 0.16mm
Wall Loop: 1
Top Layers: 0
Bottom Layers: 99
Sparse Infill Density: 100%
Sparse Infill Pattern: Rectilinear
Prime Tower Enabled:
Width: 10mm
Prime Volume: 10mm³
Brim Width: 3mm
Brim Type: Mouse ear (Optional)
Brim Width: 5mm
Brim-Object gap: 0.1mm
Brim ear max angle: 125
Brim ear detection radius: 1mm

These are basic settings I used for all my Hueforge files.

This is the instructions from HueForge:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x100mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 1.6mm and the Actual Thickness is 1.6mm

Filaments Used:
            #000000 PLA+ Sunlu Black Transmission Distance: 0.6
            #ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
            Start with Black
            At layer #8 (0.72mm) swap to White for the rest.

Some common white filament with a high transmission distance are as follows:

Bambu Lab PLA Basic White: TD=5

Sunlu PLA Basic White: TD= 7.5

Creality PLA Basic White: TD= 10.4

Elegoo PLA Basic White: TD= 5.5

ESun PLA Basic White: TD= 5

Polymaker PLA PolyLite White: TD= 5

(These are just some reported TD readings. They can change per roll, brand, mixture, batch and a ton of other factors. But any white should do fine.)

I use Sunlu, Jayo, and TecBears Filaments (These are all produced by Sunlu.)

I also use Polymaker HT-PLA black for our bookmarks and other commercial Hueforge products. I would recommend but it’s not necessary.

Please Comment and Like if you enjoy this type of Prints.

Commercial License will be forth coming so stay tuned.

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Standard Digital File License

This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.

Originality of the Model

Models(3)

Attachments(2)