anycubic
chiron
layerfan
- 0.2mm layer, 6 walls, 25% infill
1-disc
ASA
Designer
14
4
Español:
Es un pequeño mod para añadir un segundo ventilador de capa ya que para capas altas con boquillas grandes (0.6 / 0.8mm etc) uno solo es insuficiente y no da tiempo a enfriar del todo el material depositado, con este mod se puede ir más rápido con capas altas. Los cables del ventilador de capa secundario van soldados a la parte superior del conector del ventilador de capa original.
English:
It is a small mod to add a second layer fan since for high layers with large nozzles (0.6 / 0.8mm etc) only one is insufficient and does not allow time to fully cool the deposited material, with this mod you can go faster with high layers. The secondary layer fan cables are soldered to the top of the original layer fan connector.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
- Chiron_second_layer_fan_ASA.3mfDesigner
716.09 KB
2025-08-22
