No AMS/MMU needes, I printed mine with just 4 manual colorswaps on a CC1
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.76mm

    #000000 PLA+ Elegoo Black  Transmission Distance: 0.8
    #b80000 PLA+ Elegoo Red  Transmission Distance: 3.5
    #f64e00 PLA+ Elegoo Orange  Transmission Distance: 4
    #ffffff PLA+ Anycubic White  Transmission Distance: 4.4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Red
    At layer #12 (1.04mm) swap to Orange
    At layer #17 (1.44mm) swap to White

Border Only Colors from here until the end.
    At layer #23 (1.92mm) swap to Black for the rest.