No AMS/MMU needes, I printed mine with some manual colorswaps on a CC1

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.48mm and the Actual Thickness is 1.92mm

#000000 PLA+ Elegoo Black Transmission Distance: 0.8

#00328f PLA+ Elegoo Dark Blue Transmission Distance: 3.5

#ffffff PLA+ Anycubic White Transmission Distance: 4.4

#ea140e PLA Elegoo Red Transmission Distance: 3.5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Dark Blue

At layer #11 (0.96mm) swap to White

At layer #12 (1.04mm) swap to Black

At layer #16 (1.36mm) swap to Red

At layer #20 (1.68mm) swap to White

Border only:

At layer #24 (2mm) swap to Black for the rest.