19
1
a tiny tug boat about 190mm in length.
printed in ABS for its good glue adhesion.
The printed parts are only for the structure of the bost, usual r/c boat modelling skill as well as other accessories such as motors, shafts etc are required to finish the model
video in action:
Originality of the Model
The author declares that this work is their personally shared model
This model is licensed under the following terms:
Credit must be given to the creator
Models(30)
base.stl
12.39 KB
2025-07-14
- capstan.stl
94.42 KB
2025-07-14
- deck.stl
199.89 KB
2025-07-14
- door.stl
14.73 KB
2025-07-14
- desk.stl
7.41 KB
2025-07-14
- funnel_upper.stl
41.98 KB
2025-07-14
- funnel_lower.stl
56.82 KB
2025-07-14
- funnel_standoff.stl
43.64 KB
2025-07-14
- hull.stl
483.87 KB
2025-07-14
- life_ring.stl
338.17 KB
2025-07-14
- main_pully.stl
209.16 KB
2025-07-14
- mast_R.stl
82.50 KB
2025-07-14
- mast_L.stl
68.64 KB
2025-07-14
- opening2.stl
2.43 KB
2025-07-14
- opening1.stl
2.43 KB
2025-07-14
- opening.stl
3.60 KB
2025-07-14
- nav_light_R.stl
7.60 KB
2025-07-14
- motor_base.stl
10.04 KB
2025-07-14
- rudder_opening.stl
1.64 KB
2025-07-14
- nozzle.stl
37.78 KB
2025-07-14
- nav_light_L.stl
7.60 KB
2025-07-14
- motor.stl
66.68 KB
2025-07-14
- side_pulley.stl
345.10 KB
2025-07-14
- skirt_1.stl
141.88 KB
2025-07-14
- stand.stl
179.96 KB
2025-07-14
- steering_wheel.stl
265.51 KB
2025-07-14
- wheel_house_3.stl
33.58 KB
2025-07-14
- test.stl
289.93 KB
2025-07-14
- wheel_house_2.stl
11.21 KB
2025-07-14
- wheel_house_1.stl
6.72 KB
2025-07-14
View all(30)
