doll
diy
Action Figure
miniature
manga
Mecha Musume
anime
Desktop Army
40
4
Consider this a major upgrade to my MiniMusume body!
Designed for customization, you will need Mesh Mixer to pull individual STLs to print as-is. This version allows for screw joints (I use 3/16" 1-72 ), removeable faceplates, and overall more refined proportions.
You will need:
4x 3/16" 1-72 screws
A pin vice with a 1.75mm,a 2mm, and a 3mm bit
5 copies of the doubleball joint
The tolerance between the head parts and all the peg holes is .0015mm, the tolerance between the balljoints and the sockets is .005". I have printed these parts with my Form 2 but you should be able to print on an FDM printer with some additional sanding at the .0015" connections.
The back and holdyhands support 3mm pegs.
Originality of the Model
The author declares that this work is their personally shared model
This model is licensed under the following terms:
Credit must be given to the creator
Models(6)
Raw_Female_Body.obj
8.72 MB
2025-07-05
- Raw_Grippy_Left_Hand.obj
5.34 MB
2025-07-05
- Raw_Head_Assembly.obj
30.28 MB
2025-07-05
- Raw_Left_Arm.obj
16.51 MB
2025-07-05
- Raw_Left_Leg_Flat.obj
11.65 MB
2025-07-05
- Raw_Male_Body.obj
8.50 MB
2025-07-05
View all(6)
