Phoenix ashtray:

• For personal/travel usage
• With groove for sealing rubber (For a regular hair band with a diameter of 4 cm)
• Bayonet thread

Print Settings:

• Material: ASA
• Flow rate: 0.95 (95%)
• Nozzle diameter: 0.6 mm (recommended)
• Layer height: 0.2 mm
• Perimeters: 3 (with 0.4 noozle use 4 perimeters)
• Solid layers: Top: 6, bottom: 4
• Infill: 35%
• Brim: 4 mm
• Print speed: 30 mm/s
• Print orientation: As in .stl files
• Support: No

Benefits of printing:

• Chamber
• Heated chamber at 45°C

• Smooth PEI bed plate, 3DLack
  
  

• If you don't have any of the benefits, you can use ASA_anti-warping_triangles, in PrusaSlicer/Superslicer set precise alignment (for proper alignment of objects on the print bed) and use a 4mm brim on everything.
  
  

Note: The Phoenix_Bottom model includes a groove (at the end of the bayonet thread) for inserting a sealing rubber band. Use tweezers to attach the rubber band into groove.

(With a rubber band, you will get a full anti-smell seal).