I designed this simple key shelf to fit our old IKEA board. It was printed using an Elegoo Centauri Carbon and Elegoo PLA with standard settings in the Elegoo slicer, using a 0.4 mm nozzle. Printtime around 5 hours.

All parts fit on a 256 × 256 mm print bed if arranged properly. However, I wanted different colors, so I printed them separately.

The shgelfpieces can be pressed directly into the hole in the hook. I used a tolerance of 0.11 mm — depending on your printer's precision, you might need to adjust this if the fit is too tight or too loose.

The board 204.233.91 has unfortunatly been discontinued so this is a nieche print.