Yuji from JJK
No AMS/MMU needes, I printed mine with just 3 manual colorswaps on a CC1
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.05x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.52mm and the Actual Thickness is 1.52mm

    #000000 PLA+ Elegoo Black  Transmission Distance: 0.8
    #ffffff PLA+ Elegoo White  Transmission Distance: 5.4
    #b80000 PLA+ Elegoo Red  Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to White

    At layer #10 (0.88mm) swap to Red

Border Only Colors from here until the end.
    At layer #23 (1.92mm) swap to Black for the rest.