1. Basic Information

- Model Name: Cyberpunk Multi-functional Bowl (Planter / Cat Food Bowl)
- Printing Technology: FDM 3D Printing
- Application Scenarios: Desktop planter, pet food bowl, desktop storage container, etc.

2. Printing Configuration

- Recommended Material: PLA+ / PETG
- PLA+: Easy to print, moderate strength, smooth surface, suitable for indoor use;
- PETG: Water and stain resistant, better toughness, ideal for frequent contact with water/food.
- Color Suggestion: Light khaki / off-white (matches the model's mechanical aesthetic, customizable).
- Layer Height: 0.2mm (balances detail and printing speed)
- Infill Density: 20%–30% (ensures structural strength while controlling weight)
- Support Structure: None (integrated design, no overhangs)
- Wall Thickness: 2.0–2.5mm (improves durability and prevents leakage)
- Bottom/Top Thickness: 1.2–1.6mm (enhances bottom load-bearing capacity and sealing)
- Printing Speed: 40–60mm/s (fine printing on outer walls, can reduce speed appropriately)
- Temperature Settings:
- Nozzle: 200–220℃ (PLA+) / 230–250℃ (PETG)
- Bed: 50–60℃ (PLA+) / 80–90℃ (PETG)

3. Post-processing Recommendations

- Sanding: Lightly sand outer and inner walls with 2000-grit sandpaper to eliminate layer lines and improve texture.
- Sealing Treatment (for planter / food bowl use):
- Apply food-grade epoxy resin or waterproof coating to the inner wall to prevent water seepage;
- If used as a cat food bowl, it is recommended to use PETG material and clean thoroughly before use.
- Painting: Spray matte or metallic paint to enhance the cyberpunk mechanical texture.

4. Inspiration

The design is inspired by the fusion of cyberpunk mechanical aesthetics and pragmatism:

- The outer armored splicing structure, bolt textures, and pipeline details restore the futuristic tech feel;
- The hollow cylindrical structure balances the drainage needs of a planter and the capacity of a food bowl;
- The multi-functional design adapts to desktop and pet scenarios, integrating tech-sense into daily life.

5. Assembly Instructions

1. The model is printed in one piece, no additional assembly required;
2. If used as a planter:
- Reserve drainage holes at the bottom (add small holes to the model before printing);
- After adding ceramsite and soil, small succulents or green plants can be planted.
3. If used as a cat food bowl:
- Clean directly before use, regular disinfection is recommended;
- Can be placed on the ground with a non-slip mat to prevent pets from moving the bowl.2. Painting Recommendations (For One-Piece Printing)

1. Pre-treatment: Sand the model surface with 2000 grit sandpaper to eliminate layer lines and improve paint adhesion.
2. Primer: Apply a coat of gray or white primer first to enhance the coverage of subsequent colors.
3. Color Separation Painting:
- Armor plates: Matte black/dark gray to create a sense of weight;
- Pipes/bolts: Metallic silver/copper to highlight mechanical details;
- Inner wall: Light beige/white to keep it clean and tidy.
4. Protective Coating: Spray a matte clear coat to protect the paint and enhance texture.