The Sun Tray is a three-part organizer inspired by the shape of the sun. It features a hidden storage system that combines an open tray with a concealed compartment below.

The two semicircular tray halves sit on top of the base, creating a central linear slot. This slot allows coins to be inserted vertically so they drop into the hidden bottom container, keeping the surface clean and clutter-free.

The top trays are perfect for keys and small daily objects, while the lower compartment can store coins, bills, or anything you prefer to keep out of sight. One of the tray halves can be lifted at any time to access the hidden storage.

How to Print 

The model is printed in three parts: base + two tray halves.

Tray halves are designed to be printed on their flat side edge to improve the curved surface quality and avoid visible layer lines.
No supports required for any part.

Recommended layer height: ~0.2 mm.
Base infill: ~20%.
Tray halves: use solid walls (full wall thickness, minimal infill).

If the tray halves fit too tightly, lightly sand the slot area.
For permanent assembly, parts can be glued.