Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Nuck-A-Bull Fallout Diorama

This 3D printable diorama brings the iconic Fallout spirit to life with a playful yet eerie scene: Vault Boy joyfully riding a nuclear training bomb labeled “Nuck-A-Bull.” The composition blends humor with the franchise’s signature atomic-age aesthetic, creating a display piece that feels like it was pulled straight from a Vault-Tec propaganda reel.

The model is divided into 4 separate, easy-to-print parts:

• A laboratory-style base with a dedicated cutout for the main figure

• Vault Boy riding the Nuck-A-Bull bomb, posed with his classic confident grin

• Two Vault-Tec laboratory computers, each detailed with retro-futuristic panels and logos

Both the base and computers feature Vault-Tec branding, reinforcing the immersive Fallout atmosphere. The entire setup resembles a training facility where even nuclear annihilation gets a cheerful thumbs-up.

Designed specifically for FDM printing, the model includes well-optimized supports that are:

• Easy to access

• Cleanly removable, even in tight areas

• Simple to detach using standard filament cutters

Each part can be printed separately, making the process flexible and beginner-friendly while still delivering a highly detailed final piece.

Dimensions:

• Base: 26 mm (H) × 145 mm (W) × 177 mm (L)

• Vault Boy + Nuck-A-Bull: 118 mm (H) × 118 mm (L) × 60 mm (W)

• Computer 1A: 75 mm (H) × 37 mm (L) × 30 mm (W)

• Computer 2A: 93 mm (H) × 71 mm (L) × 28 mm (W)

Perfect as a collector’s piece, desk display, or painting project, this diorama radiates that strange Fallout magic where nuclear danger meets cartoon charm

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   

• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support