table leg stabilizer
printer table support
furniture bracket
table leg connector
Ikea Lack support bracket
- PETG - 0.2mm layer, 6 walls, 20% infill
1-disc
PETG
Designer - PLA - 0.2mm layer, 6 walls, 20% infill
1-disc
PLA
Designer
6
0
Copy from Printables:
After i made the Ikea Lack enclosure for my Original Prusa i3 MK3 i noticed a lot of noise during printing (more than before i had the enclosure). I identified that the problem came from the instability of the stacked lack tables.
With this support bracket properly stabilizing the tables, the noise has been reduced to almost nothing.
Another advantage of the support brackets is that the table legs won't bend as easily which makes the enclosure easier to move.
You can also use to bracket to fix in place 2 stacked tables.
You need 1 bracket per table leg and 8x 4x25mm screws per bracket.
Originality of the Model
The author declares that this work is their personally shared model
This model is licensed under the following terms:
Credit must be given to the creator
Remixes must be shared under the same license
Models(3)
hoekstuk-ikea-kast.stlDesigner
100.35 MB
2026-07-14
- hoekstuk-ikea-kast-pla.3mfDesigner
21.40 MB
2026-07-14
- hoekstuk-ikea-kast.3mfDesigner
21.40 MB
2026-07-14
View all(3)
