Here I share the RYU Diorama. This model is designed with multi-layer depth, textured clothing, and separate parts to achieve the finish and relief of a real collector's figure.

PRINTING INSTRUCTIONS & TOLERANCE TEST:

First, print Ryu's character and run the tolerance test. The base slots have a 0.25 mm offset from the characters and buildings. This value may be sufficient for you, or you'll need to increase or decrease it after testing with the values in photo . You'll need to correct the X-Y hole compensation.

The value you obtain should only be used when printing the platform( For me I used 0.05 ). 

Ryu and Ken need glue for some parts. I duplicated these parts because they are thin, in case they break when peeled off. All parts are oriented downwards for a better finish.

In the sky profile, you can find the yellow areas separately if you want to highlight these, just like the K.O. sign.

I have also added profiles in case you prefer keychains or magnets. I hope you like it. Write me if you have any questions.