Hello,

I have a modular track for you based on the RCP mini 96 track (30cm tiles). The size of the “tile” in this case would be 15cm. To print the complete set you will need to print 74 straight lines, 14 inside corners and 14 outside corners. While I found the parts to fit well within the tolerances given, you may find that you need to sand down one or two edges.

You can lay the track on any surface, but something tacky (like EVA foam) will have a better grip on your car. I used 6 Harbor Freight anti-fatigue mats (2x2ft tiles) to create a 4x6 layout as shown in the image above.

The printing is not difficult!

Happy printing!

I used PLA/PETG as the material.

No need to use supports!!!

If you are interested in my work, the links are here:

https://www.instagram.com/ainon3dprint/

https://www.tiktok.com/@ainon3dprint?_t=ZN-8vUc2lHAHh8&_r=1

If you would like to support me financially, please do so here:

https://www.patreon.com/Ainon3Dprint

My work will always be free for everyone!

Thank you for your support, I am happy to hear that :-)

Have a nice day