Pristine Armor Stand - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲

Outfit your royal armories with the Pristine Armor Stand, a meticulously crafted 32mm scatter terrain piece showcasing a gleaming suit of plate armor. This pristine display brings an air of polished readiness and immersive detail to your tabletop barracks.

Part of my project is building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉

⚔️ Expand Your Sessions

Looking for other high quality miniatures, terrain or chibi decor?

👉 Unlock the full collection, 1 to 1 Print Support & Commercial License here: https://www.patreon.com/MikeGyverMinis

⭐ Why Mike Gyver Minis? ⭐

🏅 Real World Printing: I only showcase the real prints. What you see is what you get.

🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.

🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab X1C/P2S.

⚙️ Ready-to-Print Files: Includes tuned .3mf project file!

• For Bambu Studio / OrcaSlicer / Prusaslicer (..._FDMConfig.3mf)

   

⚠️ LICENSE: PERSONAL USE ONLY ⚠️ This file is the intellectual property of Mike Gyver Minis.

• You may: Print this file for yourself, your friends, or for gaming sessions.
• You may NOT: Sell the physical prints, sell the digital files, or distribute the files.

Want to sell these prints? Join the Merchant Tier on my Patreon! 

Merchants get:

✅ Commercial License to sell physical prints legally.

✅ Bambu Lab Optimized Files (Pre-supported & Tested).

✅ Access to the full Miniature and Decor Collection (Elites, Class Archetypes & Bosses).

➡️ Get your Commercial License here: https://www.patreon.com/MikeGyverMinis

Explore All My Free Model Sites: ➡️ https://linktr.ee/mikegyverminis 

Spend less time troubleshooting, more time playing! 🎉

🛠️ Print Settings & Advice 🛠️

• Printer Used for Testing: Bambu Lab X1C / P2S
• Nozzle: 0.4
• Build Plate: Super Tack Pro (P2S version, but it works for other printers). Highly recommended!
  • Set the temp to 50degrees for Enclosed, 55-60 degrees for open printers.
  • If you use another build plate you may need to add a brim or increase the Initial Layer Expansion to 8 or so.
• Layer Height: 0.08mm
• Infill: 15% Gyroid
• Supports: Yes - Use the included .3mf file for your slicer! (Recommended!)
• Filament: Bambu PLA Basic Blue Grey

🔥 Important Printing Advice:

1. Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament are essential.
2. Support Removal:
   • Use tweezers/cutters ✂️ carefully.
   • Minor cleanup (light sanding) where supports touch is normal. ✨
   • Be very careful around the bottom of the armor. Take your time when removing supports
      

⚙️ .3mf File Info (Please Read!):

• This download includes a tuned project file:
  1. ..._FDMConfig.3mf: For Bambu Studio, OrcaSlicer, & PrusaSlicer.