Material Tray
Drying
Drying Box
- 0.24 mm layer height, 2-wall structure, 15% infill density
1-disc
PETG
Designer
28
2
As shown in the figure, this model is ready to use after simple assembly.
It consumed a total of 13 g of PETG filament and took 37 minutes to print—these figures are based on the P2S slicing preview.
Please note:
0. Use the modifier to set the outer walls and the center of the top cap to 36% infill, employing a honeycomb lattice structure.
1. Avoid setting the print bed temperature too high, as this may prevent the model from being removed cleanly.
2. Allow the model to cool completely before removing it from the build platform to avoid damage.
3. This model was designed with a layer height of 0.24 mm; ensure that the first layer is printed at 0.20 mm while subsequent layers maintain a consistent height of 0.24 mm to prevent assembly issues.
4. For added strength, we recommend applying adhesive at the joints.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
- 料盘轴干燥盒 发布.3mfDesigner
117.53 KB
2026-02-25
