lid
creality
riser
k1c
k1
grille
ventilation
k1se
21
0
22.02.24 - Added corner K1C logo
03.12.23 - Added Ventilation grille 16mm28.11.23 - Added ventilation grille (2 versions) for the 22mm version is printed without support in one model, nothing needs to be assembled (Disassembled model for if you want to assemble from 2 different colors)The lid riser is from my model series for the K1, I try to make simple models so that even a novice in 3D printing can print them.To print, you need a Creality Print slicer and the standard settings set by the manufacturer.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
No derivative works or remixes of this model allowed
Models(10)
Lid Riser 22mm logo.stl.stlDesigner
232.50 KB
2025-10-27
Lid Riser 22mm no logo.stl.stlDesigner228.01 KB
2025-10-27
Lid Riser V2 16mm.stl.stlDesigner218.83 KB
2025-10-27
Rear right corner 22mm.stl.stlDesigner76.25 KB
2025-10-27
Ventilation grille 22mm.stl.stlDesigner693.83 KB
2025-10-27
Corner K1C logo.stl.stlDesigner172.05 KB
2025-10-27
Lid Riser 22mm logo Ventilation grille.stlDesigner2.25 MB
2025-10-27
Rear part of the Lid Riser.stlDesigner4.77 KB
2025-10-27
Ventilation grille 16mm.stl.stlDesigner611.61 KB
2025-10-27
Ventilation grilleFor painting.stl.stlDesigner671.37 KB
2025-10-27
View all(10)
