- Layer height: 0.12 mm, wall thickness: 2 layers, infill density: 15%
1-disc
PETG
Designer
5
0
Armed Mechanical Bird
Assembly is straightforward—simply follow the main assembly diagram.
Before printing, be sure to thoroughly clean the PEI print bed and ensure its adhesion is optimal; also verify that your printing materials are completely dry.
Once the model is fully assembled, the overall height of the main body reaches 86 mm, requiring approximately 45 grams of material and taking about 3 hours to print.
Use PETG matte filament or PETG material, set the layer height to 0.12 mm, apply a 2‑wall infill structure, keep acceleration at 1000 or lower across all axes, and maintain a print speed below 100 mm/s for small components.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
- 武装机械鸟.3mfDesigner
2.79 MB
2025-10-06
