Nexprint Logo
Beta
3D ModelsEvents1 Million Creator Fund
$
1
8
5
2
0
Upload

  • filament

  • lid

  • dryer

  • sunlu

  • door

  • dry

  • s2

  • vent

  • wedge

  • filamentdryer

  • spacer

  • filadry

  • doorvent

Sunlu S2 Door / Lid Spacer / Door Vent / Wedge
Print Profile(1)
  • both - 0.2mm layer, 2 walls, 15% infill

    1-disc

    PLA

    Designer

1

1

41

5

Released 2025-09-26
Details
Files(3)
Makes & Comments (0)

Summary
For better ventilation and drying of the filament and to achieve shorter drying times, the lid of the Sunlu FilaDryer S2 should be slightly open.
Based on the linked remixes a better fitting accuracy was achieved and the material requirement was reduced by 44%. Less than 30cm of filament is needed to print the low model with 2.5mm lid opening.

 

Versions
Two versions are available: 2.5mm lid opening ("low") and 5mm lid opening ("high").

 

Print
Please print in PETG or even more temperature-stable materials.
Print direction as specified in the file (upright).

 

Do you like my work? I would be very happy if you would support my work on Ko-fi.

 

Differences of the remix compared to the original

  • inner shape adapted for a better fitting accuracy
  • two different height versions designed
  • width reduced from 30mm to 20mm
  • rounded some edges

Originality of the Model

The author declares that this work is their personally remixed model

Adaptation source:https://www.printables.com/model/274581

This model is licensed under the following terms:

Credit must be given to the creator

Only noncommercial uses of the work are permitted

Remixes must be shared under the same license

Models(3)

  • model file image
    SUNLU_S2_Lid_Spacer_both_variants_anycubic.3mfDesigner

    79.50 KB

    2025-09-24

  • SUNLU_S2_Lid_Spacer_high_5mm_gap.stlDesigner

    174.30 KB

    2025-09-24

  • SUNLU_S2_Lid_Spacer_low_2.5mm_gap.stlDesigner

    174.30 KB

    2025-09-24

  • View all(3)

No more