Roller
Back
BackRoller
Back Roller
6 Inch by 10 inch back-roller PLA TPU Multi-texture
Print Profile(1)
- 0.2mm layer, 2 walls, 15% infill
6-disc
PLA/TPU
Designer
11
0
Released 2025-09-09
6 inch by 10 inch back roller with three textures with cut print option and optional end caps to glue in.
Print in Parts.
Print PLA with min of 15 infill PLA-CF recommended with 25% infill.
Print TPU shell will very little infill, adjust to preference. 2 Walls with 5% infill with TPU 95A.
Print TPU as one part, to allow TPU over PLA heat TPU or print PLA in two parts and glue together inside PLA.
TPU can be very difficult to pull over PLA in once part
Optional PLA end caps for looks and extra strength.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
No Copyright.
Models(1)
- 6-Inch-by-10-inch-backroller-PLA-TPU-Multi-texture.3mfDesigner
7.86 MB
2025-09-08
No more
