Description

A hand fan with a subtle flower design. please look at the versions to know the differences.

Versions:

Old version:

To assemble, click the infill into the pedal base. This is a tight fit, so sanding might be nessecary. To improve the look of the infill, print the infill upside down so the nicer side (the top) becomes the top in the fan. In the picture it uses 16 flowers peddles. The pin is made to fit exactly 16, so if you want to save on plastic and print less, please adjust the pin/cap yourself. I suggest using glue to adhere the infill to the base as the pressure of whipping the fan back and forth makes the infill fall out sometimes.

Updated version:

I uploaded an additional model for the flower pedals that fit together better than the original ones. I also made the base of the flower pedal thicker so it becomes more sturdy. I would recommend printing these pedals with 0.1mm layer height. For these adjustments, I cut back on the amount of flower pedals in order to not make the fan too thick. The updated pin supports 10 updated flower pedal bases. I also still advise you to print the infill upside down in order to get a nicer top result.

I HIGHLY RECCOMEND GLUEING THE INFILL  AND THE BASE TOGETHER FOR THIS VERSION

I am the original maker of this design on printables and am sharing this to broaden my designs to the world. For any q