Nexprint Logo
Beta
3D ModelsEvents1 Million Creator Fund
$
2
2
3
4
3
Upload

  • holder

  • bed

  • clamp

  • cutter

  • cutting

  • material

  • weight

  • laser

  • weighted

  • workpiece

Lasercutting Weighted Workpiece Holder
Print Profile(0)

  • Earn points by adding print configurations

1

1

4

1

Released 2025-06-20
Details
Files(1)
Makes & Comments (0)

For laser cutters with a ‘knife’ bed system as shown below.
 Holes should be at least 8mm apart (usually not a concern.)

 

 

 

 

 

 

 

 

 

 

 

Threads are M6 and are 22mm deep. Only screw in for the first 20mm or so.

I suggest PETG, ASA or stronger, but if you need something urgently, PLA will work too. 

Threads are somewhat tights. If your printer is cheap, consider scaling up the model by one or two percent. 

Use eye-bolts and small 1kg weights if you can.

 


Ideal print orientation ^

Bill of materials

  • Name
    Quantity
    Notes
  • 1
    Large M6 Bolt
    1
    1 per holder. Ideally eye-bolt for easy weight attachment

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Credit must be given to the creator

Models(1)

  • model file image
    Lasercutting Workpiece Holder.stlDesigner

    829.67 KB

    2025-06-19

No more