Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Female Dragonborn RPG - Chibi Dual Axe Warrior

From the volcanic kingdoms beyond the shattered mountains comes the Shadowscale Reaper, a deadly Dragonborn warrior feared across taverns, battlefields, and forgotten ruins alike. 

Armed with two vicious battle axes and cloaked in dark, jagged armor, this winged champion stands ready to tear through demons, dragons, and rival warlords with relentless fury. Her curved horns, scaled features, and torn draconic wings give the miniature a powerful silhouette straight from the pages of an epic fantasy campaign.

This chibi-style fantasy miniature blends fierce warrior energy with stylized proportions, creating a model packed with personality and display presence. Intricate armor details, dynamic weapons, and layered textures make the figure especially satisfying to paint while remaining optimized for smooth FDM printing.

Designed for FDM 3D printing with supports included, the model offers clean geometry and strong details ideal for tabletop RPGs, collectors, painters, and fantasy fans searching for a unique Dragonborn heroine.

Whether she becomes a cursed arena gladiator, abyssal huntress, dragon clan champion, or legendary dungeon boss, this warrior is ready to dominate your next adventure.

Model Details

• Height: 80 mm

• Style: Chibi Fantasy RPG

• Character Type: Female Dragonborn Warrior

• Weapons: Dual Battle Axes

• Features: Horns, Wings, Heavy Armor

• Optimized for FDM Printing

• Includes Supports

• Great for Painting & Display

• Perfect for DnD, Pathfinder, tabletop RPGs, and fantasy collections

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   

• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support