Spool Roller
electricians
cable drum roller
Spool Roller - Inspired by electricians cable drum roller
Print Profile(0)
113
7
Released 2025-07-12
You will need to print:
2x Middle Brace
2x Roller
2x Side Profile
4x Roller Pin
Other than the printed parts you will need:
4x 8x16x5mm bearings
12x M3 cap head screws (length have to be at least 10mm, but can be up to 30mm)
Originality of the Model
The author declares that this work is their personally shared model
Original creator:
PuggiDesign
Reprint source:https://www.thingiverse.com/thing:4971514
This model is licensed under the following terms:
Credit must be given to the creator
Models(4)
Middle_brace_-_spool_roller.stl
35.04 KB
2025-07-11
- Roller_-_spool_roller.stl
46.96 KB
2025-07-11
- Roller_pin_-_spool_roller.stl
5.75 KB
2025-07-11
- Side_profile_-_spool_roller.stl
203.21 KB
2025-07-11
View all(4)
No more
