Chibi Succubus - The Heart Charmer | Cute D&D Decor by Mike Gyver Minis! 💖✨

Meet the new Chibi Succubus - The Heart Charmer!

Part of my collection of Cute D&D Decor, designed to be an adorable and easy-to-print model for your desk, shelf, or (a very large) tabletop! 🤩

⭐ Why Mike Gyver Minis? ⭐

🎨 Designed for Cuteness & Printability: Optimized for successful prints.

🔬 Rigorously Tested: Printed multiple times on Bambu Lab X1C/P2S & K2 Plus (see photos!).

⚙️ Ready-to-Print Files (Multi-Slicer!): Includes TWO tuned .3mf files!

    1. For Bambu Studio / OrcaSlicer / PrusaSlicer (`..._FDMConfig.3mf`)

    2. For Creality Print (`..._FDMConfig_CP.3mf`)

* Both have tested FDM support settings configured! Also includes an unsupported .stl.

💖 FREE Model! Get the FULL Chibi Collection! 💖

Like this cutie? Support the project, get my entire organized library (including all my Chibis and D&D minis!), and 1-on-1 print support via Patreon:

➡️ https://www.patreon.com/MikeGyverMinis ⬅️

Explore All My Free Model Sites:

➡️ https://linktr.ee/mikegyverminis 🔗

Start your adorable collection today! 🎉

---

 🛠️ Print Settings & Advice 🛠️

* Printer Used for Testing: Bambu Lab X1C / P2S / K2 Plus (CoreXY)

    * Note: Tested extensively. Results may vary based on your printer type, calibration, and filament.

* Supports: Yes - Use the included `.3mf` file for your slicer! (Recommended!)

* Some models have a small square below them. This is by design, to generate better supports around feet/capes/tails

* Layer Height: 0.2mm

* Infill: 10% Gyroid

* Filament: PLA (Tested with Bambu PLA Basic Blue Grey)

🔥 Important Printing Advice:

1.  *Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament (💧➡️🔥) are essential for success!

2.  Support Removal:

    * COOL DOWN COMPLETELY first! 🥶

    * Use tweezers/cutters ✂️ carefully, starting at the base/brim. Pull supports *down & away*.

    * Be extra gentle on thin parts like [Model Part - e.g., swords, fingers, spikes]. 👀 Slow is a smooth removal!

    * Minor cleanup (light sanding) where supports touch is normal. ✨

⚙️ .3mf File Info (Please Read!):

* This download includes TWO project files for your convenience:

    * 1. ..._FDMConfig.3mf: For Bambu Studio, OrcaSlicer, & PrusaSlicer.

    * 2. ..._FDMConfig_CP.3mf: For Creality Print.

* Both files contain the model pre-oriented with my tested FDM support settings.

---