Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Bunny the Wild Barbarian –  D&D RPG Adventures

From the untamed edges of the forgotten wilds comes Bunny the Wild Barbarian, a fearless warrior born of tooth, fury, and instinct. Though small in stature, this savage champion carries the spirit of a raging storm. With a mighty double-bladed axe gripped firmly in its paws and a base littered with the remains of fallen foes, Bunny stands ready to defend its territory—or conquer new realms at your command.

Forged layer by layer through the ancient craft of FDM 3D printing, this miniature bears the subtle marks of its creation—each line a testament to its journey from molten filament to physical legend. The model includes support structures, allowing hobbyists to complete the ritual of refinement themselves, and comes with a separate base, making it ideal for customization, painting, or integration into your personal tabletop world.

Whether serving as a fierce barbarian hero, a cursed forest guardian, or a deceptively deadly familiar, Bunny the Wild Barbarian brings character and storytelling potential to every campaign.

Perfect as:

• A player character or NPC miniature in tabletop RPGs such as Dungeons & Dragons
• A collectible fantasy figure for enthusiasts and painters
• A desk companion radiating primal strength and personality
• A decorative piece for gaming rooms, shelves, or creative workspaces
• A unique gift for RPG players, dungeon masters, and fantasy lovers

Let this tiny harbinger of chaos stand beside your dice, guarding your rolls and reminding all who see it: even the smallest creatures can carry the greatest fury.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support