decor
space
rocket
1
0
3D relief picture of a space shuttle flying over the earth. Perfect for decoration for every space fans!
Please read the following instructions for the perfect result :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 178x128.95mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm
#000000 PLA Prusament Prusa Galaxy Black Transmission Distance: 0.2
#b1c3c8 PLA Prusament Galaxy Silver Transmission Distance: 6.4
#ffffff PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Prusa Galaxy Black
At layer #8 (0.72mm) swap to Galaxy Silver
At layer #17 (1.44mm) swap to White for the rest.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
Auftrag_Yannick_Rakete_Front_178x129.stlDesigner
55.18 MB
2026-03-15
Attachments(1)
txt
Auftrag_Yannick_Rakete_describe.txt
0.66 KB
2026-03-15
