Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.88mm

    Elegoo PLA Black  Transmission Distance: 0.3
    Elegoo PLA Red  Transmission Distance: 1.6
    Elegoo PLA Orange  Transmission Distance: 5.5
    Elegoo PLA Blue  Transmission Distance: 4
    Elegoo PLA Yellow  Transmission Distance: 6
    Elegoo PLAWhite  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #10 (0.88mm) swap to Orange
    At layer #13 (1.12mm) swap to Blue
    At layer #17 (1.44mm) swap to Yellow
    At layer #21 (1.76mm) swap to Orange
    At layer #23 (1.92mm) swap to Blue
    At layer #29 (2.4mm) swap to White for the rest.