Low-poly print-in-place model of a Flexi Reindeer in Doodle style

It transforms from a solid, standing model to a flexi model

To lock the legs set them streight down and push up. You will hear a click
The force and tolerances are set like for kids - but it will depend on the filament used

Model can be printed in a single color, in parts for assembling or on multicolor printer

Not recommended for a toy for kids younger than 3 years old

---

Video with first presentation
https://www.instagram.com/p/DCzAgemNSh5/

Video with assembling and some reindeer yoga
https://www.instagram.com/p/DC1rpAQtzED/

More Flexi toys in my collection:
https://www.nexprint.com/en/C47_3D/home?component=UserCollect&subComp=UserCollectDetail&collectionId=1982424029268639744

---
 

Printed with PLA with:
0.1mm layer height
10% grid infill
2 walls
 

---
 

Connectors (on legs and body parts) will be printed 'half-in air'
There is a 0.2mm gap between connectors and other parts on Z axis - this works like a self support
It is not recommended to resize model up - apart of connectors looking little worse there should be no problems with the print itself but you may need too much force to transform from solid to flexi and the opposite. You are free to test it tho
 

Print one FlexiReindeerDoodle first before going to print MULTICOLOR or PARTS versions
See if everything will work fine
 

---
 

Multicolor print:
Add FlexiReindeerDoodle , MULTICOLOR_dark and MULTICOLOR_red to bed plate - you can also add optional color for a smile
All 3 models should be in the exact same place (a 'frame' on dark and red models will help you in this - it will not be printed so ignore notification about modele errors)
Select color for dark and red and then merge all 3 models to one
Now you can duplicate merged models if you want to print more at once

I printed 9 models with 0.2mm layer height (to lower a number of filament changes)
On photos it's the one with brown smile (wich is optional)
 

---
 

Printing in parts
PARTS_Antlers, eyes and hooves may be printed in brown
PARTS_Nose in red
PARTS_Body in light brown

Print one group of colors at a time

I recommed to print a PARTS_test file first and one set of antlers, eyes and a nose to test if everything will fit like it should
Models were made with 0.05-0.075mm tolerance

If parts will not hold together or you will not be able to fit them in holes you can change XY compensation / Horizontal expansion (use positive values when they are too loose or negative if they are to thick - for example start with +0.02 or -0.02)
You can also just glue the parts together
If you want to give it to a smaller kid (3-5yo) glue the parts no matter if you think they are holding strong
 

ASSEMBLING:
There are two left hooves and two right ones
A notch should face to the front of the reindeer

Every other part should fit only one way
Additionally right eye is longer than a left one - flat face (the one that was on the bed) will go inside
Right antler is thicker
Nose is wider on the lower front part
 

---