Check out this two-filament, backlit HueForge of Deadpool!

 I kept it simple using only black and white to really make the details pop

if you need a lightbox check out my Changeable Litho Hueforge light box frame 15x10cm

https://www.nexprint.com/en/models/G4182315?component=UserPublish&printConfigId=G2444251

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100 x 150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.2mm

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

This print uses 2 unique filaments

Swap Instructions:

Start with BambuLab Basic Jade White

At layer #8 (0.72mm) swap to BambuLab Basic Black for the rest.