adapter
lid
bottle
can
cap
redbull
bottle adapter
can adapter
[0,25 Can Red Bull] 0.12mm layer, 3 walls, 15% infill
2-disc
PLA
Designer- [0,33+0,5 Can] 0.12mm layer, 3 walls, 15% infill
2-disc
PLA
Designer
44
10
Bottle Adapter for Can 0,33l / 0,5l + 0,25 (Red Bull Size)
Here it is….. the printable adapter to convert your can into a bottle!
- Snag fit for 0,33l / 0,5l Cans + 0,25 (Red Bull Size)
- Good tightness tested with PLA & PETG
- Little latch to remove from can (Holds very strong)
- Integrated Thread with is compatible with most Screw Caps (2mm pitch)
- Printable Screw Cap on second Plate
It could be a little bit hard to push it on the can but that is important to get a good tightness.
It's recommended to print in PLA+ or PETG do not use Silk it will break to easy.
Have fun with the part 🍻 And don't forget to like and subscribe✔
Commercial license you can get here:
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(5)
- Can+Bottle+Adapter (1).3mfDesigner
3.31 MB
2025-11-06
Cap.stlDesigner3.64 MB
2025-11-06
0,33l_0,5l.stlDesigner5.86 MB
2025-11-06
- Can+Bottle+Adapter(BULL).3mfDesigner
3.18 MB
2025-11-06
0,25l(RedBull).stlDesigner5.65 MB
2025-11-06
View all(5)
