This is my fantasy spider, I hope you like it. You can print them without support or edge.             
 Infill: 15%
Perimeter: 2

That's my cute joint spider that can go in and out of the rope. Let it dangle from the ceiling or add a magnet that can be built into the spider or the web.

I recommend using a string that is 1-3 mm thick. I can't say exactly how much will fit in the spider as it varies with each thickness. I used white yarn that is about 1.5mm thick.

The spider is printed in place. You just have to glue or tie the web separately to the spider's string.

How do I assemble it?

1. Make a knot in the end of the rope.

2. Push the rope into the opening until it comes out at the back.

3. Push it so far that the knot gets stuck in the opening.

4. Now you can stick the knot if it’s too loose for you. First, attach the web to the end of the rope and wrap the rope up.

5. You can now glue a magnet into the web and the spider that is 8x3mm (4x) in size (round or square).

If you have an active club membership, you can sell the model without having to ask me. You can find more detailed information under my club.

If you want to support me, join my Patreon.
https://www.patreon.com/Flexi__Maker