Orc Construction Building - RPG - TTRPG -Wargaming

drakeforge3d

Miniatures>Architecture

Print Profile(1)

All

A1 mini

X1 Carbon

P1S

H2D Pro

A1

X1

P1P

X1E

H2D

0.16mm layer, 2 walls, 7% infill

Designer

11 h1 plate

Download STL/CAD Files

0

1

0

0

0

0

Released 43 minutes ago

Description

Boost Me (for free)

Thank you all very much for your support, if you like this model and my work please leave a boost ^^

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

From crude stone, twisted timber, and the bones of their enemies, the orcs raise their grim monuments of war. Brutal, imposing, and steeped in blood, each structure in the Orcish Constructions series brings the savage might of orcish craftsmanship to your RPG and TTRPG worlds. Perfect as terrain or scenario objectives, these models let your battlefield echo with the war drums of chaos.

Orcish Dwelling (Orc House)

This Orcish Dwelling shelters warriors, shamans, and clans united beneath banners of conquest. Smoke rises from its fires, and crude walls echo with the growls of beasts and the clamor of steel. Though rough, it stands as the beating heart of orcish life.
Printed on a BambuLab A1 Mini, with minimal supports and straightforward cleanup, this model makes an ideal addition to war camps or raiding villages in your campaign.

   Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

•  

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support