sd card
SD Card Holder
Print Profile(0)
26
10
Released 2025-08-20
Tray for storing SD Cards. There is a 10 card and 20 card model.
As with my NVME tray, recommend 100% infill and if you get artifacts in the slots just slow the speed or clean it out post print.
v3 - Same as v1 but 1mm less for width for a tighter fit on the cards
v4 - Same as v2 but 1mm less for width for a tighter fit on the cards
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(4)
SDCardHolder_v2.stlDesigner
205.88 KB
2025-08-17
SDCardHolder_v3.stlDesigner105.32 KB
2025-08-17
SDCardHolder_v4.stlDesigner206.51 KB
2025-08-17
SDCardHolder_v1.stlDesigner105.41 KB
2025-08-17
View all(4)
No more
