>> Model Introduction >>>>>>>>
| > Source of Inspiration
The head of the household requested a box for storing earrings, complete with a lid. Well, that’s simple enough—I’ll just whip up a straightforward design.
| > Diverse Perspectives
Whether this model is suitable for other applications should be evaluated based on its specific specifications.

>> Slice Settings​ >>>>>>>>
| > For reference only—adjust as needed​
Filament: PLA
Layer Height
 > Layer height: 0.2 mm
 > First layer height: 0.2 mm
Walls and Surfaces
 > Wall printing order: Outer wall / Inner wall
Walls
 > Wall loops: 2
Infill
 > Sparse infill density: 15%
 > Sparse infill pattern: Grid
Support
 > Enable support: Not required
Skirt
 > Skirt type: Combined
 > Skirt loops: 1
Brim
 > Brim type: Outer brim only
 > Brim width: 5 mm

>> Assembly Instructions >>>>>>>>
Print each component separately, then assemble with ease.

If the pins prove difficult to print, you can substitute them with M3 x 55 mm screws.

>> Additional Notes >>>>>>>>
1. The model was created using Blender 4.4.3.
2. Under the CC BY-NC-SA 4.0 license, you are free to modify the model as needed to suit your desired style.

>> Statement >>>>>>>>
Due to limited personal time and energy, I only share model-related information through personally registered platforms, accounts, and my own domain (PoweredBy.CN). Any model designs created by me that are published on non-personal or unauthorized platforms/accounts are entirely unrelated to me and do not involve any financial or other vested interests.

I have always embraced the philosophy of “free sharing and open access” online. For publicly released model designs, I will never impose restrictions on downloads—whether through paid plans, membership tiers, point systems, or any other form of limitation. Please verify the source carefully.

You are welcome to express your appreciation for my models by downloading, liking, following, favoriting, or supporting my work. I deeply value your feedback and critiques.

Provided that you agree to and comply with the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), I warmly encourage you to share the model pages outside the platform in any format. Moreover, I fully support—and actively endorse—the practice of sharing models after they have been upgraded or modified.